Kee Rigid Anchor Rigid Tie-off Posts

Stay grounded when working at height

Kee Post rigid anchor tie-off offers a straightforward solution for securing workers to the building’s structure, enhancing safety during maintenance activities. Its modular design and flexibility cater to a broad spectrum of applications, from supporting suspended platforms to providing direct fall protection and integrating with horizontal lifelines. Tie-off points are designed for use on roofs where there are no permanent guardrails or other anchor devices.

Kee Post/ roof post / fall arrest / fall arrest systems / travel restraint / fall protection / permanent roof anchor

Why do you need Kee Post^® permanent roof anchor?

Diverse Application

Kee Post^® roof anchor range is very versatile and, therefore, has a variety of applications. These include suspended platforms, window washing operations, equipment tie-back, fall protection and horizontal lifelines. This means you can adapt the Kee Post to your site.

Multiple Roof Types

Kee Post^® roof anchor works on multiple roof types. These include flat or low-slope roofs, BUR membrane system, single-ply membrane, modified bitumen, green roofs and metal roofs with underlying structures of steel, concrete or wood.

Multiple Connection Types

Kee Post^® roof anchor was designed to be attached to the underlying roof structure using several methods. Connections are available for bolting on, bolting around, casting in place, epoxy in place, and welding on.

Key Features

Compliant

Kee Post meets and exceeds CSA, OSHA, Cal-OSHA and ANSI standards.

Reliable

Reliable construction - High quality American welds, galvanized to ASTM A123 and manufactured to ISO 9000 factory control system.

Options

Kee Post is offered in two heights and a wide variety of methods of attachment and mounting to accommodate different applications and roof buildups.

Adjustable

Adjust when you need it - A wide range of connection methodologies through a standard plate.

Versatile

All standard surfaces - Steel, concrete, timber, whatever the roof type, our anchors will suit.

Engineered performance

No guessing or over-building - Our components and configurations are tested and proven to ensure performance in a wide range of applications.

A Variety of Applications

Tieback Anchor

These anchors provide a secure attachment point for window washing and façade maintenance equipment.

Single Point Anchor

Using the tapped attachment option a swivel allows for tie off with the use of a lanyard or retractable lifeline.

Lifeline Anchor

Pair the tapped Kee Post with Kee Line horizontal lifeline to provide continuous safety along a workpath.

Overview of Kee Post^® Roof Anchor

Anchor Configuration Builder

The diagram on the side shows you how to build and order your anchor post using the SKU coding system.

In this example, a Cal/OSHA 24” Galvanized U-bar Wrap Around Base would dictate a part number: CO24UBGWAR

Find below the options available.

Anchor Post Options:

Check the options available to build and order your anchor post below, as shown in the diagram above.

1. COMPLIANCE

2. HEIGHT

3. TOP

4. BASE FIX

Kee Post^® Roof Anchor Downloads

Document	Format
Kee Post® Rooftop Anchor Posts Brochure	PDF Download

Document	Format
Kee Post® Rooftop Anchor Posts Brochure	PDF Download

Document	Format
Kee Post® Rooftop Anchor Posts Brochure	PDF Download

Protects the environment and your bottom line

The incorporation of polyurethane insulation within each Kee Post upright offers several significant benefits:

Enhances Building Efficiency - The insulation provided by Kee Post acts as an effective barrier against heat transfer, minimizing heat loss to maintain a stable interior temperature. This improvement in thermal regulation contributes significantly to both the building’s overall efficiency and energy savings.
Minimized Environmental Impact - Kee Post is engineered not just for your safety but with the environment in mind. Its optimized design and efficient supply chain ensure a smaller carbon footprint than most of the other rooftop tieback anchors in the market.

Frequently Asked Questions

General

- What are the best applications for Kee Post^® Permanent Roof Anchor?
  
  Kee Post^® Permanent Roof Anchor are the perfect solution for suspended platforms, window washing operations, equipment tie-back, and rooftop fall protection.
- What are the different roof types that Kee Post^® Anchor can be installed on?
  
  Flat or Low-Slope Roofs, BUR Membrane System, Single-Ply Membrane, Modified Bitumen, Green Roofs and Metal Roofs with underlying structures of steel, concrete or wood.
- Is Kee Post^® Roof Anchor code-compliant?
  
  Kee Post^® Permanent Roof Anchor will withstand a 5000 lb load without permanent deformation and are compliant to Canadian OH&S codes as well as the following compliance standards: • OSHA 1926.502 • ANSI Z359.18 • CSA Z259.15 • Cal-OSHA Title 8 3291 (for Cal-OSHA Range)
- What are the Kee Post rigid anchor top options?
  
  We have three options: U Bar (UBG/UBS), Forged (FRG), and Tapped (M12).
- What are the Kee Post rigid anchor height options?
  
  We have three options: 12'', 18'', and 24''
- What are the Kee Post rigid anchor base fix options?
  
  We have eight options: Epoxy (EPX), Shallow Deck (SHD), Cast-in (CST), Weld on (WON), Wrap Around (WAR), BeamClamp (BCP), Bolted (BLT), and Screw in (SCW).

Highest Standards for Access Safety

Federal [Canada] Canada Occupational Safety and Health Regulations, SOR/86-304, Sections 12.01 to 12.09
Alberta Occupational Health and Safety Code, 191/2021 Part 9, Fall Protection Sections 138 - 161
British Columbia Occupational Health and Safety Regulations, B.C. Reg. 296/97 Part 11, Fall Protection, Sections 11.1 to 11.10
Manitoba Workplace Safety and Health Regulation, Man. Reg. 217/2006 Part 14, Fall Protection, Sections 14.1 to 14.29
New Brunswick General Regulation -N.B. Reg. 91-191 Part VII, Protective Equipment, Sections 49 - 51
Newfoundland and Labrador Occupational Health and Safety Regulations, 2012, N.L.R. 5/12 Part X, Fall Protection, Sections 138 to 146
Northwest Territories Occupational Health and Safety Regulations, R-039-2015 Part 7, Personal Protective Equipment, Sections 103 to 109 and Part 9 Safeguards, storage, warning signs and signals, Sections 118 to 124

Nova Scotia Workplace Health and Safety Regulations, N.S. Reg. 52/2013 Part 21, Fall Protection, Sections 21.1 to 21.4
Nunavut Occupational Health and Safety Regulations. R-039-2015, Part 7 Sections 104 to 109, and Part 9, Sections 118 to 122
Ontario Construction Projects, O. Reg. 213/91 Sections 26 - 26.9 and Industrial Establishments, R.R.O. 1990, Reg. 851 Section 85
Prince Edward Island Fall Protection Regulations, EC2004-633
Quebec Regulation respecting occupational health and safety, O.C. 885-2001 Division XXX, Means and Equipment for Individual and Group Protection Sections 347 - 354.1 and Safety Code for the construction industry R.R.Q. 1981, c. S-2.1, r. 6 Division II, General Provisions Sections 2.9.1 to 2.9.3, Safety measures
Saskatchewan Occupational Health and Safety Regulations, 2020 Sections 9-2 - 9-5
Yukon Occupational Health and Safety Regulation, O.I.C. 2006/178 Protective Equipment and Clothing - Fall Arrest Sections 1.37 to 1.43

Canadian National Standards (CSA)

CAN/CSA-Z259.16-15 Design of Active Fall Protection Systems
CAN/CSA-Z91: Health and Safety Code for Suspended Equipment Operations - User Standard
CAN/CSA-Z271: Safety Code for Suspended Platforms - Design Standard